Hi,
I am facing one strange issue, we have one Windows 2012 R2 server on which group policy computer level settings is not applying, user level settings is applying without any issue. When i run gpupdate /force /Taget:Computer getting below error and event log.
"Computer policy could not be updated successfully. The following errors were encountered:
The processing of Group Policy failed. Windows attempted to retrieve new Group Policy settings for this user or computer. Look in the details tab for error code and description. Windows will automatically retry this operation at the next refresh cycle.
Computers joined to the domain must have proper name resolution and network connectivity to a domain controller for discovery of new Group Policy objects and settings. An event will be logged when Group Policy is successful.
To diagnose the failure, review the event log or run GPRESULT /H GPReport.html from the command line to access information about Group Policy results."
Found Event 1030 in Event Log with Error Code 58, Event description as per below..
|
|
|
|
|
|
| EventData |
| SupportInfo1 | 1 |
| SupportInfo2 | 2481 |
| ProcessingMode | 0 |
| ProcessingTimeInMilliseconds | 39140 |
| ErrorCode | 58 |
| ErrorDescription | The specified server cannot perform the requested operation. |
| DCName | \\DC1.xxxx.com |
Also found below log in Group Policy Operational Log
Log Name: Microsoft-Windows-GroupPolicy/OperationalSource: Microsoft-Windows-GroupPolicy
Date: 5/5/2016 9:58:30 AM
Event ID: 7320
Task Category: None
Level: Error
Keywords:
User: xx\xx
Computer: xx
Description:
Error: Computer determined to be not in a site. Error code 0x77F.
Please suggest, followed below steps so far..
1. Removed server from Domain and Rejoined.
2. Moved server from one OU to other OU.
3. Once Server removed from Domain, gpupdate /force is working without any issue.
4. Checked using Group Policy Modeling Wizard, not found any issue and showing all required policy are applying and no security filtering found.
5. Disabled Firewall on Member Server.
6. Checked required ports on Network Firewall, found all required ports are open, since User GPO are applying we don't think it's port issue on Firewall.
7. gpupdate /force /Target:user running fine without any issue..
8. Disabled Anti Virus Software.
Please guide..
MCP, MCTS