Hi
Does the group policy by default affects (pose restrictions) to Local Administrator user or members of Local Administrators group on a Windows system.
Thanks
Taranjeet Singh
zamn
↧
Does Group Policy Applies to Local Administrator or member of Local Administrators group
↧
"An error has occurred while collecting data for Scheduled Task." error message while looking at a GPO details in GPMC...
Hi all;
While looking at a GPO details in GPMC, the following error message appears inScheduled Tasks section of the Preferences section:
An error has occurred while collecting data for Scheduled Tasks.
Look at the following figure, please:
The actioned I have taken so far:
- Checked the replication between the two DCs and everything works as expected.
- checked the mentioned path and find no folder with the name of Scheduled Task.
- The domain is based on Windows Server 2008 R2 and all domain controllers are fully patched.
Any ideas?
Thanks
Please VOTE as HELPFUL if the post helps you and remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
↧
↧
group policy
how can I know who created GRoup Policy and what group policy created EVENT ID ?
↧
group policy preference 4098 error 0x8007007b
We're using Group policy preferences to deploy shared printers to users but certain computers keep getting the following error on some of the printers deployed but not all of them.
Event Type: Warning
Event Source: Group Policy Printers
Event Category: (2)
Event ID: 4098
Date: 2009/02/25
Time: 8:34:07 AM
User: NT AUTHORITY\SYSTEM
Computer: computername
Description:
The user 'printer' preference item in the 'Information Systems Settings {3FABC171-BB2D-482A-911C-B0D11D227D8B}' Group Policy object did not apply because it failed with error code '0x8007007b The filename, directory name, or volume label syntax is incorrect.' This error was suppressed.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
The most users are only members of the local users group on their computers. The user's computers are Windows XP sp3 with the CSE installed and the print server is Windows 2003 SP2. I can temporarily resolve the issue by re-applying the printer's security settings on the server but the error does come back within a week. On another note, some of the printers won't map for the user. They'll get an error saying "You do not have sufficient access to your computer to connect to the selected printer." Even though all the printers have the default permissions with everyone group having print permissions set. Any help would be appreciated.
Thanks,
Ryan
↧
Software restriction policy not working
I am currently using Windows Server 2012 to create a group policy that restrict the user in the domain cannot open Windows Media Player.
I have also tried AppLocker but the user is still able to run it. Is there anyone can help me?
↧
↧
File type association and Open file dialog doesn't work in 2012GPO
Hi.
1. I had GPO to set File association on RDP farm in 2008 and it worked. In 2012 it doesn't work.
2. I want to add folder on local client computer when users logs in RDP farm. GPO "Open File dialog" doesn't work here too.
Please help.
↧
Sysvol broken - Windows Server 2012
I have a 2 DC environment which is only 6 months old.
The FSMO server recently went down unexpectedly so FSMO was forced to the 2nd DC.
A new DC was then created and is now replicating with the other server but I've noticed a major issue now with sysvol
Sysvol appears to have broken.
- dcdiag shows that DFSREvent failed.
Everything else has passed it's test
- Checked the DFS Replication event log and saw that the DFS replication service failed to communicate with the partner.
(the issue is this server is now retired) So this server should be replicating with another server.
- I was recieving a lot of errors in DFS with errors 4612 and 5008 so checked on the registry of the FSMO server and in HKLM/currentcontrolset/services/DFSR/Parameters/sysvols/seedingSysVols/domain, the parent company server was the old FSMO server.
I've changed this now to the new FSMO server
I'm just wondering if anyone can suggest what steps I can take to get the sysvol replicating sucessfully so that both DCs can handle gpo's.
The only option that all seem to point to is a DFSR Sysvol Authoritative restore but I don't have a backup as I don't think sysvol was setup correctly on this even before it became the master chief?
↧
Create Local Administrator group on computer via GPO
I have created a group on my in AD called LocalAdmins.
The purpose of this is to add the LocalAdmins group which I can then add users to on the DC that will then have Local administrator access to the individual computers that I add the LocalAdmins Group to. If I add the group manually to a each workstation computer it works. fine.
However to add this group to a whole mess of computers is tedious. So I wanted to do it via a GPO, automatically. I created a GPO based on these instructions on this web site.
https://community.spiceworks.com/how_to/907-gpo-to-push-out-local-administrators-across-a-domain
I didn't do the (RDT) option he talks about.
My Servers are 2003, 2008 and 2012r2. I did this on the backup DC which is 2012r2.
When I set up a link/gpo to one OU's it did not work. I have gpupdated /force etc but it does not migrate to the computers that the users who are in that OU are using.
I then set up a test OU and put the GP off of that OU and then added a COMPUTER to that Test OU. Now note Im putting a computer into the OU not Users. This seemed to work. (the computer was an xp if that makes any difference.) So it works if I put a COMPUTER into the TEST OU but it does not seem to work for USERS, when I put the Group Policy in other OU's that are just domain Users.
Does this policy only work on computers only or what am i missing.
Thanks.
↧
Save credentials run as administrator with GPO
Hello All?
I need IE start run as admin for all standard users. Our some application need IE start admin privilege. I'm following this guide. I can config run as administrator for local user computer. How can with GPO? Anyone suggest me?
Thanks
↧
↧
Map drives disappearing during GPO background refresh on Windows 2012 R2.
Hi guys,
I have small project: move users from the old terminal server based on Windows 2008 R2 to the new terminal server based on Windows 2012 R2. Both servers are virtual and on the same Hyper-v server. Everything went smooth, however after one day "test user" started to complain that Explorer crashes. I checked everything and I didn't find anything interesting. I asked user for password and login like him to the New Terminal server. I opened all apps plus Explorer and noticed that at one point Explorer starts to flickering and and some of the windows closed (taskbar still exist). Windows which were closed are Explorer windows with shares from File Server on the same Hyper-v server. I troubleshooted it, network etc. ALL OK.
Than I opened once again shares in Explorer and run gpupdate /force and I had the same result like user. My windows with shares closed in background.
GPO settings which deploy for Users who use Terminal Servers. I don’t have any problems on Windows 2008 R2.
I have solved problem changing option "Remove this item when it is no longer applied" plus I have changed Action to Update. However any idea why this happens?
Luca
↧
RSOP
server - win2012 r2
We have 6 group policy objects tied to a domain. I added software install computer group policy to these six. When I generate RSOP on the AD box, I could see the added policy is going to apply.
On member workstation effected by this policy, I run gpresult /H GPReprot.htm. There is no trace of my added policy. Nothing in the eventvwr.
How do I troubleshoot this?
Thanks in advance
↧
Group Policy for domain users
Hi
I have windows server 2012r2 and i want to disable internet access for domain users. is there possible to disable internet through Group Policy?
Help...........
↧
Group Policy Issue - Targeting Remote Domain Security Groups
Hi All
I need help with the following issue
We have two domains Harris Scarfe & Best & Less with a Trust Type of Forest (Two way Trust)
In the Best & Less Domain, they can target harris scarfe security groups in group policy.
In the Harris Scarfe domain we cant target Best & Less Security groups
Why cant we target their security groups but they can target ours?
What do I need to do to troubleshoot this
Please note with file permissions on a file server, I dont have any problems targeting remote users or security groups
↧
↧
Hide Server IP of Network Drive
I have Server IP (192.168.45.41) and a shared folder (ADHOME) for network drive share. When I allocate the network drive user. Server IP is also exposed to user. I want to hide server IP on client machine.
Need your help in this regard please.
Thanks in advance
↧
Windows 10 - gpresult /r does not list user group memberships
On a Windows 10 Client (threshold 2) gpresult fails to show user group memberships.
Username, Domain name and OU are listed correctly.
gpresult /r says "unexpected error" (FEHLER: Ein unerwarteter Fehler ist aufgetreten.)
In a html report built with gpresult /h all the settings are shown correctly but the list of security group memberships is just empty.
whoami /groups lists all the groups correctly but not gpresult.
↧
loop back processing
what is loop back processing in GPO it means linking user policy to computers OU or object? if yes what is advantage of linking user policy into computers which scenario it will be useful second question users will apply last so it will take precedence?
↧
GPO fail to modify register
I applied a GPO via Group Policy Preferences to modify register. we run gpresult at client end, we found there is an error on my GPO settings: The following settings have applied to this object. Within this category, settings nearest the top of the report are the prevailing settings when resolving conflicts.
how to fix it?
thanks.
↧
↧
Lock cells in a worksheet by GPO
I need to prevent users from editing the excel file via group policy. i have download the Admin- Templates and installed on the object. However this dont have option block the edit in excel. it has options to block saving the file.
Please help me in this regard if we have any other alternative. my aim is only to allow the users to view the excel file once they get it by email.
System Admin Danube-
↧
Logon VB Scripts are not working in Windows 10
Hi Guyz
In my company we have around 1500 Windows machines. All are in domain. Recently as a testing purpose we have deployed few Windows 10 machines in our organization. only one issue i have noticed is Logon VB scripts are not working in Windows 10. In my company we have plenty of VB scripts for various purposes and we are about to receive 350nos Windows 10 machines in our organization. Could someone help us out of this issue.
Server : Windows 2012 R2
Domain and Forest Functional level : Windows 2008 R2
Client OS : Windows XP,7,8,8.1 and 10
Please let me know if anyone need any further details.
Thanks in advance.
Shanif Salim
↧
Upgrading Central Store - Error Message Namespace
Hi,
I just upgraded the Central Store with the latest Windows 10 1511 template and got an error message.
The error message appeared when I edited a GPO and went into Computer Configuration > Policies.
Namespace 'Microsoft.Policies.WindowsStore' is already defined as the target namespace for another file in the store.
File \\domain.local\SysVol\domain.local\Policies\PolicyDefinitions\WinStoreUI.admx, line 4, column 80
Do anyone know how to solve this?
↧